Disposable laboratory material/consumable

PP-Syringe

The syringe pump Vitfit can use quite all the syringe on the market. Some of them are presented here with Luer-Lock connector.

• volume 2 ml, graduation 0.1 ml (Réf. C540.1)
• volume 5 ml, graduation 0.2 ml (Réf. C541.1)
• volume 10 ml, graduation 0.5 ml (Réf. C542.1)
• volume 20 ml, graduation 1 ml (Réf. T550.1)
• volume 30 ml, graduation 1 ml (Réf. T551.1)
• volume 50 ml, graduation 1 ml (Réf. T552.1)

Glass-Syringe

borosilicate glass, with Luer Lock connector, can be autoclaved at 200 °C

• volume 1 ml, (Ref. LLC1CC)
• volume 2 ml, (Ref. LLC2CC)
• volume 5 ml, (Ref. LLC5CC)
• volume 10 ml, (Ref. LLC10CC)
• volume 20 ml, (Ref. LLC20CC)
• volume 30 ml, (Ref. LLC30CC)
• volume 50 ml, (Ref. LLC50CC)
• volume 100 ml, (Ref. LLC100CC)
• volume 150 ml, (Ref. LLC150CC)
• volume 200 ml, (Ref. LLC200CC)
• volume 250 ml, (Ref. LLC250CC)

Made of fluoroplastic (PFA). Translucent, to transfer small quantities of aggressive liquids. For temperature from -200 °C to 250 °C.

H963-01: capacity 2,5 ml, total length 185 mm

H963-02: capacity 5,0 ml, total length 230 mm

Syringe needle

• length 25 cm, diameter 3 mm

The Expell tips without the Plus low retention properties are of the same high manufacturing standards, maintaining strict tolerances with ideal wetting properties and high transparency and purity levels.

Due to special polymers and an extremely smooth inside surface, the ExpellPlus tips from Capp® virtually eliminate sample retention, and reduce the binding of DNA, RNA and Proteins to a minimum.

They can also be used with all other major pipettes on the market.

Sterile or Non-Sterile

When ordering, make sure that you choose between tips with or without filters as well as between sterile tips which are delivered in racks and non-sterile which come in plastic bags.

The ExpellPlus tips also comprise of a very affordable and high quality range of filter tips, the use of which eliminates any risk of cross contamination.

The ExpellPlus filter tips are tested and certified to conform to strict bio-load specifications which are:

• No detectable nucleic acid contamination
• No detectable PCR inhibitors
• No detectable endonucleases
• No detectable endotoxin

Ideal for PCR work

The ExpellPlus filter tips have a hydrophobic barrier that prevents cross-contamination of sample fluids and that inhibits vapours from getting in contact with the pipette shaft. This makes the ExpellPlus filter tips ideal for PCR work and applications that involve bio-hazardous, radioactive or aggressive samples.

Sterile or Non-Sterile

When ordering, make sure that you choose between tips with or without filters as well as between sterile tips which are delivered in racks and non-sterile which come in plastic bags.

Precise Repeating Syringes are available in 8 sizes from 50 ul to 50 ml and comes in a bulk and individually wrapped sterile packaging. Designed to fit not only Capp Rhythm repeaters but also many other manual repeating pipettes available today they provide quality and value oriented solution to one's repeating needs.

Bulk

Sterile, Individually packed

Designed for accurate and rapid fluid dispensing, these polystyrene pipettes are sterile, pyrogen free and cotton plugged for a variety of liquid handling applications.

The sharp, black, highly legible permanent graduations prevent ambiguity and guarantee precise reading and accurate dispensing to +1-2%. Reverse graduations show volume removed or remaining on all pipettes larger than 1mL.

Pipettes are supplied individually wrapped in fibber-free colour coded paper and plastic combination that is easy to open. The uniform mouth piece fits all major pipettors and is colour coded for ease of identification.

Capp Harmony pipettes are made from transparent medical grade polystyrene sterilized by gamma irradiation. Each lot is tested for endotoxins (C.5 Eu/Ml),(ISO TO993-11). Cytotoxicity (ISO 10993-5) and are guaranteed non-haemolytic (ISO 10993-4). Ideal for use within tissue culture applications.

Ils sont disponibles en 0.5, 1.5 et 2.0 ml de volume maximal. Les microtubes peuvent résister à des forces centrifuges élevées, sont résistants à la température aux produits chimiques et garantis sans fuite.

• grande zone de marquage
• facile à ouvrir et à fermer
• graduations de 0.1 à 1.5 ou 2.0 ml
• autoclavable lorsqu'il est ouvert (121 ° C, 20 min)
• sans DNase, sans RNase, apyrogène et sans métal

Conçu pour couvrir les besoins quotidiens de stockage et de centrifugation d'échantillon en laboratoire, les tubes à centrifuger BlueCapp comportent des graduations faciles à lire ainsi qu'une zone d'écriture de grande taille (20x50mm).

Leurs bouchons étanches ont de larges arêtes afin de fournir une prise en main optimale même avec des gants. Combiné avec une fermeture en ¾ de tour, ils améliorent considérablement la vitesse de manipulation et permettent de n’utiliser qu’une seule main.

Fabriqué à partir de polypropylène, les tubes à centrifuger BlueCapp sont autoclavables et testés pour supporter jusqu'à 6000 RCF (15 ml) et 9400 RCF (50ml).

they are available at sizes from 125 250, 500, 1000, 2000 ml

they are read out y the SFR-Shake Flask Reader or by Coaster CFG.

they are available at sizes from 500, 1000, 3000 ml

they are read out y the SFR-Shake Flask Reader or by Coaster CFG.

they are read out y the SFR-Shake Flask Reader or by Coaster CFG.