Incubator

Thermostatically controlled incubators

Incubators for a wide range of applications

The CFC-free thermostatically controlled incubators from are designed to ensure continous temperature control in a wide range of applications, such as:

• 20 °C BOD determination
• 4 °C storage of waste water sample
• 25 °C enzyme activity (TTC-test)
• 37 °C colony count

The maintenance-free cabinets are suitable for reliable temperature control in a liquid sample over the range of 2 to 40°C (± 0.1°C). A fan in the upper portion provides good temperature distribution

The temperature control unit is available as a separate retrofit component for refrigerators without a freezer compartment.

The control range extends from or 2°C to 40°C in 1°C steps. The control unit is supplied ready for connection. 230 V / 50 Hz.

TC 135 S: with standard door, 230 V / 50 Hz, powerful cooling, integrated heating, 3 metal racks + 1 bottom grid + 4 sockets, Consumption: approx. 1.35 kWh / 24 h, I. D.: 513 W x 441 D x 702 H mm, Net capacity: approx. 135 l, O. D. : 600 W x 600 D x 850 H mm with work top, 600 W x 600 D x 819 H mm without work top, Weight: approx. 39 kg

TC 175 S: like TC 135 S but:3 metal racks + 1 bottom grid + 5 sockets, Consumption: approx. 1.23 kWh / 24 h, I. D. (approx.): 470 W x 440 D x 1062 H mm, Net capacity: approx. 175 l, O. D. (approx.): 600 W x 610 D x 1250 H x mm, Weight: approx. 51 kg

TC 255 S: like like TC 135 S but: 4 metal racks + 1 bottom grid + 9 sockets, Consumption: approx. 1.42 kWh / 24 h, I. D. (approx.): 600 W x 560 D x 1452 H mm, Net capacity: approx. 445 l, O. D. (approx.): 750 W x 730 D x 1640 H x mm, Weight: approx. 79 kg

TC 445 S: like TC 135 S but: 5 metal racks + 1 bottom grid, Internal dimensions: 652 D x 515 W x 1300 H, Content 395 liters, Overall dimensions: 752 D x 710 W x 1516 H, Weight : approx. 79.5 kg

TC 140 G: glas door, 230 V / 50 Hz, powerful cooling, integrated heating, 3 metal racks + 1 bottom grid + 4 sockets, Consumption: approx. 1.77 kWh / 24 h, I. D. (approx.): 513 W x 441 D x 702 H mm, Net capacity: approx. 140 l, O. D. (approx.): 600 W x 600 D x 850 H x mm with work top, 600 W x 600 D x 819 H mm without work top, Weight: approx. 48 kg

TC 256 G: likeTC 140 G but: 4 metal racks + 1 bottom grid + 7 sockets, Consumption: approx. 1.56 kWh / 24 h, I. D. (approx.): 470 W x 440 D x 1452 H mm, Net capacity: approx. 255 l, O. D. (approx.): 600 W x 610 D x 1640 H x mm, Weight: approx. 77 kg

Incubator BJPXII

• LCD display Controller.
• Microprocessor PID temperature control: accurate and reliable.
• Polished stainless steel chamber.
• Round angle structure , easy to clean.
• Power socket integrated inside for additional small equipment.
• Illumination in the chamber.
• Universal Castors for easy movement.
• CFC-free environmental friendly refrigerant (R134a)
• Safety function: temperature protection threshold value can be set, Auto-off protection and alarm for abnormal situation. Parameters can be saved automatically when power off or system error
• Temperature range: 0-65 °C
• Shelves: 2 adjusatble pieces
• Time range: 0-99 h 59 min
• Power supply: 220V +/- 10 %, 50-60 Hz

Lab incubator type ACE

Microprocessor control (with timing function)

Interior of oven is made of specular steel by argon-arc-welding techniques, and the exterior of oven is made of high-quality steel sheet.

Microprocessor PID temperature controller with temperature control protection, digits display and timing function ensures a precise and reliable temperature control.

Hot-air circulating system consists of a fan keeping running under a high temperature and proper air ducts to ensure a uniform distribution of temperature in chamber.

Independent alarm system for temperature-limiting ensures experiments run safely (Option)

Recorder and printer are options which can print or record setting parameters and tracing variation curves of temperature. (Option)

Power: 220 V, 50/60 Hz

Temperature range: room temperature + 5 to 65 °C

Temperature uniformity: +/-2.5 °C

Temperature fluctuation: <+/-0.5 °

Portable incubator AE-PI

It is designed for personal uses in storing sample at low temperature or incubating samples at temperature ranging from 5°C to 60°C, doing experiment at different setting temperatures.

• The incubator employed the Peltier technology which is capable of heating and cooling.
• The incubator can be carried out and plug into the car cigarette outlet.
• Temperature range: 5 to 60 °C
• Temperature accuracy: +/- 0.2 °C
• Temperature uniformity: +/- 0.5 °C
• Temperature stability: +/- 0.2 °C
• Temperature increment: 0.1 °C
• Portability: handle and cigarette plug included
• Power: 60 W
• Operating environment: 4 to 60 °C

Portable incubator ComfyTemp

This compact incubator has a transprent door and a chamber light. It uses a Peltier element for cooling and heating. It can be connected to a car battery with the cigarette connector.

• Temp. range 5°C to 60°C
• Temp. accuracy ± 0.2°C
• Temp. uniformity ± 0.5°C
• Temp. stability ± 0.2°C
• Temp. increment 0.1°C
• Timer 1,080 hours (45 Days)
• Timer resolution 1 second
• Max. steps of temp. 5 Operating
• Environment 4°C (cold room) to 60°C
• Selection on heating and cooling Automatically Detected
• Calibration Capability YES
• Platform Dimensions 27.5 x 18.5 cm
• Dimensions (w x d x h) 29.5 x 35 x 46.5 cm
• Capacity 18L
• Weight 6 kg
• Car Cigarette Plug Included
• Electrical 100-240V, 50-60Hz, 60W

Environmental chamber TH

Temperature and humidity test chamber is used to test material structure or composite, in the high temperature and ultralow temperature continuous environment. Suitable for electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, rubber etc.material.

• Power: 220-230 V, 50/60 Hz
• Temperature range: room temperature -70 to 150 °C
• Humidity range: 10% to 95 %

Temperature test chamber GDW

The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic. A large observation window is set on the chamber door. A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body. A fixable PU moving wheel is adopted on the bottom of the test chamber.

The PID temperature controller has a touch screen control panel.

The cooler adopts original French Tecumseh fully closed compressor. The cooling system adopts single or dual low temperature loop system design.

• Fluctuation/Eveness:+/-0.5 °C / +/-2 °C
• Temperature range: -20 to 150 °C (model A), -40 to 150 °C (model B), -60 to 150 °C (model C), -70 to 150 °C (model D)
• Temperature rise speed: 1 to 3 °C/min
• Temperature fall speed: 0.7 to 1 °C/min

Thermostatically controlled CO2/O2 incubators

• PID Controller
• Graphic display round corner design for contamination prevention and easy cleanup
• Alarms

Diurnal Plant Chamber LI15-2

MRC Diurnal growth chambers are designed for studies requiring day and nighttime simulation. This unit features dual-program selector dials, which allows control of two temperature conditions and an ON/OFF illumination cycle relative to the program selected. Each system operates independently allowing for simulation of a diurnal cycle, such as an eight hour day cycle of 30°C with light followed by a sixteen hour night cycle of 18°C without light. Forced air circulation ensures the most reproducible test conditions. The chamber air is gently and continuously circulated at a rate that ensures temperature uniformity of all test samples. The unit is equipped with a hermetically-sealed compressor and an independent over temp. In addition, a one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. This chamber is ideal for plant growth studies.

• Exterior Dimensions (wxdxh): 87.7 x 87.7 x 196.9 cm
• Chamber Dimensions (wxdxh): 68.5 x 58.4 x 143.5 cm
• Temperature Range: 0°C to 45°C at 20°C ambiant
• Temperature Uniformity: ± 0.5°C at 20°C
• Incubator Chamber Capacity: 444 L
• Power: 220V
• Number of Shelves 4 included

Spark-free cabinets

Laboratory cabinets with a spark-free* interior (*spark-free interiors reduce risk of internal explosion)

The German BGR 120 guideline for laboratories stipulates that interior spaces must be explosion-protected where hazardous, explosive atmospheres can develop (for example, due to the presence of flammable liquids).

The Lovibond® CFC-free refrigerators in the EX range meet the requirements of this guideline and are fully equipped for daily laboratory use.

The carcass consists of a sturdy sheet steel housing with impact-proof and jolt-resistant powder coating.

The robust interior is made of high-strength white plastic material (PS).

The door is lockable and supplied with a righthand hinge as standard (but can easily be converted to a left-hand hinge). A tight door seal is ensured by an all-round magnetic gasket.

The temperature in the refrigerator can be continuously adjusted over the range +2°C to +10°C; a room thermostat ensures constant control.

ET 718/EX, type 180: 230 V / 50 Hz, Power consumption 120 Watt, Consumption 0,9 (kWh/24h) temperature regulation: infinitely variable 2 - 10 °C, Lockable door, changeable door stop, 4 storage levels (3 height-adjustable grid-type shelves), Internal dimensions: 700 H x 515 L x 433 W mm, Net capacity: approx. 150 l, External dimensions: 885 H x 602 W x 600 D mm, Weight: approx. 37.0 kg

ET 726/EX, type 260: 230 V / 50 Hz, Power consumption 140 Watt, Consumption 1,0 (kWh/24h) temperature regulation: infinitely variable 2 - 10 °C, Lockable door, changeable door stop, 5 storage levels (4 height-adjustable grid-type shelves), Internal dimensions: 1045 H x 515 L x 415 W mm, Net capacity: approx. 210 l, External dimensions: 1215 H x 602 L x 600 W mm, Weight: approx. 46.5 kg

ET 736/EX, type 360: 230 V / 50 Hz, Power consumption 150 Watt, Consumption 1,1 (kWh/24h) temperature regulation: infinitely variable 2 - 10 °C, Lockable door, changeable door stop, 6 storage levels (5 height-adjustable grid-type shelves), Internal dimensions: 1450 H x 515 L x 415 W mm, Net capacity: approx. 295 l, External dimensions: 1589 H x 602 L x 600 W mm, Weight: approx. 62.0 kg

ET 750/EX, type 500: 230 V / 50 Hz, Power consumption 150 Watt, Consumption 1,1 (kWh/24h) temperature regulation: infinitely variable 2 - 10 °C, Lockable door, changeable door stop, 6 storage levels (5 height-adjustable grid-type shelves), Internal dimensions: 1300 H x 652 L x 515 W mm, Net capacity: approx. 425 l, External dimensions: 1515 H x 755 L x 715 W mm, Weight: approx. 77.0 kg

UV weather resistance test chamber UVP

This series is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources.

The inner bladder of the chamber is made of imported hig class stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic. The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature.

The radiometer probe is fixed so as to avoid the frequent installation and disassembly. The radiation quantity adopts the special UV irradiatometer with high precision display and measurement. The radiation intensity is not more than 50W/m2. The illumination and condensation can be controlled independently or alternatingly and circularly.

• Workroom Dimensions (cm) 45x117x50
• Exterior Dimensions (cm) 58x128x135
• Power 4.0 KW
• Temperature Range RT+10°C to 70°C
• Humidity Range >95 %
• Lamp Spacing 35mm
• Distance between Sample and Lamp 50mm
• Quantity of Samples Supported 150mm (L) × 75mm (W), about 40 pcs
• UV Wavelength: 290nm to 400nm UV-A, UV-B, UV-C (Subject to the specifications in order)
• Lamp Power: 40W