Chemical components analysis

Analyser GL5

the GL5 comes pre-programed for glucose, lactate, cholesterol and alcohol plus one spare channel which can be used to run other Analox single-point-calibration oxidase chemistries.

After calibration with a standard of the selected metabolite, the single injection of sample is all that is needed to obtain a result and prepare the analyser for the next analysis.

Sample injection via an accurate positive displacement pipette triggers the complete analytical cycle and a hard-copy result is printed within 20 seconds.

Analyse

• Alcohol
• Cholesterol/HDL
• Glucose
• Glycerol
• Lactate
• Triglycerides

Analyser GL6

The analyser can be specified to include five of the following single point calibration assays according to your areas of interest: Ethanol, Glucose, Glycerol, Lactate, Methanol, Sucrose or Lactose.

After calibration with a standard of the selected metabolite, the single injection of sample is all that is needed to obtain a result and prepare the analyser for the next analysis.

Sample injection via an accurate positive displacement pipette triggers the complete analytical cycle and a hard-copy result is printed within 20 seconds.

Analyse

• Ethanol
• Glucose
• Glycerol
• Lactate
• Lactose
• Methanol
• Sucrose

Analyser GM8

The GM8 is used in Industrial & Biotechnology applications and offers a simple, fast and flexible method for determination of key parameters in fermentation broths, cell culture media and other microbial applications.

After calibration with a standard of the selected metabolite, the single injection of sample is all that is needed to obtain a result and prepare the analyser for the next analysis.

Sample injection via an accurate positive displacement pipette triggers the complete analytical cycle and a hard-copy result is printed within 20 seconds.

Analyse

• Ammonia
• Ethanol
• Glucose
• Glutamine
• Glycerol
• Lactate
• Lactose
• Methanol
• Sucrose

Biochemistry Analyser Sunmatik 6020

Fully automated biochemistry analyser, 200 tests/hours, up to 280 tests/hour with the optional ISE. Test mode: end point, kinetics, fixed time, immunoturbidimetry,monochromatic, bichromatic, multistandard analysis, linear and non linear calibration, single and dual reagents. Completely open for editing test parameters and calculation parameters.

Sample System

• Sample tray: 44 sample position
• Sample volume:3 to 30ul, programmed by 0.1ul step
• Sample probe: Liquid level detection and Collision protection automatically
• Probe cleaning: automatic washing both inside and outside, Carry over<0.1%
• Automatic sample dilution

Reagent System

• Reagent tray: 44 positions for single &dual Reagents.
• Refrigeration: Refrigerated reagent, refrigerated compartment with Peltier element for 24h cooling system maintaining temperature between 4 and 15°C
• Reagent bottle size: 20ml and 35ml
• Reagent volume:150 to 300ul,programmed by 0.1ul step
• Reagent probe: Liquid level detection and collision protection automatically
• Pre-heating function inventory checking.
• Real-time monitoring of reagent volume and auto alarm
• Probe cleaning: automatic washing both inside and outside, Carry over<0.1%

Reaction System

• Reaction tray: 48 reaction cuvettes
• Reaction volume: 200 to 300ul
• Reaction Temperature:37°C+0.1°C
• Mixing system: Independent mixing probe

Optical System

• Light source: Halogen-tungsten lamp
• Wavelength: 340nm, 405nm, 450nm, 494nm, 505nm, 546nm, 578nm, 620nm, 670nm, 700nm
• Linear range:0 to 3ABS

Control and Calibration System

• Calibration mode: Linear(one point ,two point and multi-point),Logit-Log4P, Logit-Log 5P, spline, exponential ,polynomial, parabola
• Control rules: Westgard multi-rule

Operation Unit

• Operation system: Windows2000 system or above
• Interface: RS-232
• Power Supply: 220V+22V, 50/60HZ+1HZ2. Power consumption: 400VA
• Temperature:15 à 30°C
• Humidity: <=85%
• Water consumption: 5L/h
• Dimension: 760(L)X570(W)X1000MM
• Weight: approx.85kgs

SONATEC, concentration evaluation by sound velocity measurement

It continuously measures the velocity of sound through liquids. Designed for applications that require maximum sensitivity and high accuracy, this device is used in various industries all around the world. Breweries and beverage manufacturers determine extract or dissolved sugar contents in-line with SONATEC. Equipped with an integrated cleaning nozzle, SONATEC HW can be installed directly into brewery wort kettles and evaporators. In numerous pharmaceutical and chemical applications SONATEC is used to control the concentration of acids, caustics and other solutions– but also for monitoring the quality of raw materials and final products. The instrument measures the speed of a sound pulse between a transmitter and a receiver. The sound pulse is created by piezo-elements and moves perpendicular to the product flow. As a specific property of each liquid, the correlation between concentration and sound velocity can be described by a mathematical polynomial. With decades of experience and own laboratory facilities, we have a particular knowledge about polynomials for a huge number of products. Any temperature drifts of the measured signal are automatically compensated for by an internal Pt1000 sensor. SONATEC displays various units, e.g. vol.%, mass %, °Brix and °Plato.

• Measuring Range: 400 - 3 000 m/s
• Accuracy: ± 0.05 m/s
• Repeatability: ± 0.01 m/s
• Response Time: < 1 s
• Pressure of Operation: max. 16 bar
• Temperature of Operation: - 25 to + 125 °C
• Temperature Compensation: Pt1000
• Material: 1.4404/AISI 316L, 1.4571/AISI 316Ti, Hastelloy C276; Monel 400, Incoloy 825, Tantal
• Connections: Varivent© DN65, Diary DIN11851 DN65, others on request
• Output: 3 x digital (24 VDC) & 2 x analog (4 - 20 mA)
• Enclosure Rating: IP65
• Power Supply: 24 VDC
• Hygienic Execution, Full CIP Capability and Maintenance Free

RHOTEC, concentration evaluation by density measurement

It continuously measures the density of liquids. Designed for applications that require maximum sensitivity and high accuracy, this device is used in various industries all around the world. Breweries and beverage manufacturers determine alcohol or dissolved sugar contents in-line with RHOTEC. Dairies rely on RHOTEC to measure milk and cream fat. In numerous pharmaceutical and chemical applications RHOTEC is used to control the concentration of acids, caustics and other solutions – but also for monitoring the quality of raw materials and final products. For density measurement, the liquid flows through a U-shaped tube. While the tube is electronically excited to oscillate at resonance, the oscillation frequency is observed. Any change in the fluid density has an impact on the detected signal and can thus be identified. As a specific property of each liquid, the correlation between concentration and density can be described by a mathematical polynomial. With decades of experience and own laboratory facilities, we have a particular knowledge of the polynomials for a huge number of products. Any temperature drifts of the measured signal are automatically compensated for by an internal Pt1000 sensor. RHOTEC displays various units, e.g. vol.%, mass %, °Brix and °Plato.

• Measuring Range: 0 to 3 g/cm3
• Accuracy: ± 0.0001 g/cm3
• Repeatability: ± 0.00001 g/cm3 Response
• Time < 1 s
• Pressure of Operation: max. 50 bar
• Temperature of Operation: - 25 to + 125 °C
• Temperature Compensation: Pt1000
• Material: 1.4571/AISI 316Ti, Hastelloy C276, Monel 400, Incoloy 82, Tantalum, others on request
• Connections: thread 3/8'', compatible to Varivent© Inline-Housings, DN40 - DN150, others on request
• Input: 6 x digital (24 VDC)
• Output: 3 x digital (24 VDC) & 2 x analog (4 - 20 mA)
• Sensor (w/o local display)
• Power Supply: 24 VDC
• Hygienic Execution, Full CIP Capability and Maintenance Free

COMBITEC, concentrations evaluation by sound velocity and density measurement

It combines the functionality of both RHOTEC and SONATEC. In various industries and around the world this device simultaneously measures density and sound velocity in 3-component liquids with highest sensitivity and accuracy. For density measurement, the liquid flows through a U-shaped tube. While the tube is electronically excited to oscillate at resonance, the oscillation frequency is observed. Any change in the density has an impact on the detected signal and can thus be identified. At the same time the instrument measures the speed of a sound pulse between a transmitter and a receiver. The sound pulse is created by piezo-elements and moves perpendicular to the product flow. As a specific property of each liquid, the correlation between concentration and density resp. sound velocity can be described by a mathematical polynomial. With decades of experience and own laboratory facilities, we have particular knowledge about these polynomials for a huge number of products. Any temperature drifts of the measured signal are automatically compensated for by an internal Pt1000 sensor. COMBITEC displays various units, e.g. vol.%, mass %, °Brix and °Plato.

• Density: 0 -3 g/cm3
• Sound Velocity: 400 - 3.000 m/s
• Density Accuracy: ± 0.0001 g/cm3
• Sound Velocity Accuracy: ± 0.05 m/s
• Density Repeatability: ± 0.0001 g/cm3
• Sound Velocity Repeatability: ± 0.01 m/s
• Response Time: < 1 s
• Pressure of Operation: max. 16 bar
• Temperature of Operation: - 25 to + 125 °C
• Temperature Compensation: Pt1000
• Material: 1.4404/AISI 316L, Hastelloy C276, Monel 400, Incoloy 825, others on request
• Connections: compatible to Varivent©, Inline-Housings DN40 - DN150, others on request
• Input: 10 x digital (24 VDC) & 2 x analog (4 - 20 mA)
• Output: 5 x digital (24 VDC) & 2 x analog (4 - 20 mA)
• Transmitter w/o local display
• Rating: IP65
• Power Supply: 24 VDC

Automatic Kjeldahl Analyser

large touchscreen for setting distillation time and alkali content

flow sensor enables real-time detection of condensate water's flow rate to garantee stable flow velocity

reagent addition through negative suction system

range: 0.1 to 240 mg N

operation mode: auto/manual

destillation time: 0-100 min/sample

recovery rate: >99.5%

sample: solid <=5g, liquid<= 25 ml

distillation power: 375-1500 W

condensate water consumption: > 1.5 l/min

safety protection: flow velocity, level, distilate temperature

repeatability: RSD<= 0.5 %

power: 220-230 V/50-60 Hz

external dimension: 360x400x600 mm

weight: 15 kg