BCP-CO2 Sensor

• The BCP-CO2 sensors can be easily integrated directly into the gas lines. It is possible to measure the carbon dioxide concentration in waste gasses from fermentations, independent of the gas flow.
• Additional gas coolers, pumps and valves are not needed to make the measurements. Fast and reliable measure data without a lot of maintenance are the result. With the aid of standard interfaces, the sensors can be connected to any process control system
• Measuring range: 0 to 10 CO2 Vol.%, 0 to 25 CO2 Vol.%, 0 to 50 CO2 Vol.%,
• Measuring principle: infrared, dual beam
• Accuracy: < ± 0,2 % FS ± 3% reading
• Long-term stability: < ± 2% reading / year
• Housing: Aluminum, IP 65
• Dimension / Weight: 100 x 100 x 130 mm W x D x H / 750 g
• Connection material: Steel 1.4571 / Sapphire / Viton / PTFE
• Connection: G 1 1/4 '', GL 45, TriClamp etc.
• Operating temperature: 5 to 30 °C, 15 to 40°C, 25 to 50°C
• Pressure range: 800 to 2000 mbar
• Pressure dependence: compensated, < ± 3 % reading (range)
• Operating humidity: 0 to 100% RH
• Power supply: 24 VDC, 1 A
• Output: RS 232, 4 to 20 mA

BCP-O2 Sensor

• The BCP-O2 sensors can be easily integrated directly into the gas lines. It is possible to measure the oxygen concentration in waste gasses from fermentations, independent of the gas flow.
• Additional gas coolers, pumps and valves are not needed to make the measurements. Fast and reliable measure data without a lot of maintenance are the result. With the aid of standard interfaces, the sensors can be connected to any process control system
• Measuring range: 0,1 to 25 O2 Vol.%, 1 to 40 O2 Vol.%
• Measuring principle: Zirconium dioxide (do not use in explosiv atmosphere)
• Accuracy: < ± 0,2 % FS ± 3% value
• Warm up: 30 minutes
• Housing: Aluminum, IP 65
• Dimension / Weight: 100 x 100 x 130 mm W x D x H / 750 g
• Mechanical connector: G 1 1/4 '', GL 45, TriClamp etc.
• Temperature range: 0 to 60 °C
• Pressure range absolute: 800 to 2000 mbar
• Humidity: 0 to 100% RH (under voltage)
• Power supply: 24 VDC, 1 A
• Output RS 232, 4 to 20 mA
• Lifetime: approx. 15.000 hours (under voltage)

BCP-CH4 Sensor

• The BCP-CH4 sensors can be easily integrated directly into the gas lines. It is possible to measure the methane concentration in waste gasses from fermentations, independent of the gas flow.
• Additional gas coolers, pumps and valves are not needed to make the measurements. Fast and reliable measure data without a lot of maintenance are the result. With the aid of standard interfaces, the sensors can be connected to any process control system
• Measuring range: CH4 0 to 100 Vol.%
• Principle: Infrared, Dual wavelength
• Accuracy: < ± 0,2 % FS ± 3% reading
• Long-term stability < ± 2% reading / year
• Housing: Aluminum, IP 65
• Dimension / Weight: 100 x 100 x 130 mm W x D x H / 750g
• Material: Steel 1.4571 / Sapphire / Viton / PTFE
• Connection: G 1 1/4 '', GL 45, TriClamp etc...
• Operating temperature: 5 to 30 °C, 15 to 40°C, 25 to 50°C
• Pressure range 800 to 1300 mbar
• Pressure dependence: compensated, < ± 3 % reading (range)
• Operating humidity: 0 to 100% RH
• Power supply 24 VDC, 1 A
• Output RS 232, 4 to 20 mA

BCP-H2 Sensor

• The BCP-H2 sensors can be easily integrated directly into the gas lines. It is possible to measure the hydrogen dioxide concentration in waste gasses from fermentations, independent of the gas flow.
• Additional gas coolers, pumps and valves are not needed to make the measurements. Fast and reliable measure data without a lot of maintenance are the result. With the aid of standard interfaces, the sensors can be connected to any process control system
• Measuring range: H2 0 to 100 Vol.%
• Measuring principle: Thermal conductivity (WLD)
• Concentration range: 0,1 bis 100 Vol.%
• Accuracy: < ± (0,2% FS + 3% reading)
• Sensor temperature: +50 to +75 °C
• Gas flow 0 to 300 l/h
• Gas pressure (absolute): 0,4 to 2,5 bar
• LxWxH / Weight: 100 x 100 x 80 mm (IP65) / 1 kg
• Connection for gas: 6 mm
• Materials in contact with gas: Stainless steel, Si, SiOxNy, gold,epoxy, Acrylnitril-butadien-rubber, Viton
• Power supply: 24V DC, 600 mA
• Output: 4 - 20 mA, RS 232
• Output impedance: 250 Ohm
• Cross sensitivities: 10% CO2 -0,95% H2, 10% CH4 1,28% H2, 10% O2 0,12% H2
• Not usable in explosive atmospheres

Software + Connection box

• The BACCom connection box is a converter box wich can be connected to a computer with a RS232 interface. Up to 8 sensors can be connected to one box.
• 2 softwares are available:
  • 1. The software BacVis was made for data recording of different sensors and gas flow meter (milligascounter®).The sensors are recognized automatically by means of their identification number. Due to the easy handling, BacVis is self-explanatory. As the obtained data are recorded in the ASCI-format, you can process them without any problems.
  • 2. The software FermVis for recording the concentration of CO2 and O2 during a fermentation with simultaneously calculation of the oxygen uptake rate (OUR), carbon dioxide emission rate (CER) and the respiratory quotient (RQ) in shake flasks and fermenters

• Carbon Monoxide (CO) Data Logger with USB Interface
• Measurement Range: 0-1000 ppm
• Accurency: ±6 % of reading
• Response time (to reach 90%): 1 minute
• Memory: 16,382 readings
• Logging rate:10 s to 5 min
• Operating temperature range: -10 to 40 °C
• Operating pressure range: 900 to 1100 mbar
• USB Interface for Set-up and Data Download
• Bright Red, Green and Orange LED Indication
• Replaceable Internal Lithium Battery
• 1/2 AA 3.6V Lithium Battery Life: 1 year
• It is not a suitable substitute for a domestic or industrial Carbon Monoxide detector/alarm
• The software is included